background image

RF WIRELESS CAMERA SYSTEM     

INSTALLATION AND USER GUIDE 

10 | 

P a g e

 

 

 
7. Limited Warranty  

 

Tuson RV Brakes, LLC (Tuson) warrants the Tuson Wireless backup camera system (RFCAM) to be free 
of defects in material and workmanship for a period not to exceed One (1) year from the date of sale to the 
original consumer, or to the first retail purchaser of a trailer on which the RFCAM  is installed. Original 
receipt(s) or other acceptable proof of purchase should be retained by the customer for verification of 
warranty date. THIS WARRANTY IS NOT TRANSFERABLE. 
 
Tuson’s obligations under this warranty shall be limited to crediting the account of a direct buying distributor 
or OEM trailer manufacturer, replacing or repairing the RFCAM products which are determined by Tuson 
to be defective in material or workmanship, within 60 days of receipt of such product by Tuson. Tuson 
reserves the right to request the product be returned intact, freight prepaid, PRIOR to processing any claim 
for warranty. 
Warranty claim must be received by Tuson within 30 days of the discovery of the alleged defect, or within 
30 days of the expiration of the warranty, whichever is earlier. Covered repairs or replacements will be 
made at Tuson’s expense. Shipment of replacement product or repaired product by Tuson will be via best 
available ground shipment carrier. Shipments other than by best available ground shipment carrier, must 
be requested in writing and must be paid for in advance by the customer. Returned product that is found 
not to be defective, will be returned at senders expense. 
 
This Warranty shall not include any products which have been improperly installed, installed contrary to 
installation instructions provided with the product, altered, tampered with or changed in any way, or utilized 
in a manner not approved by Tuson. This Warranty shall not extend to any defects arising from abuse, 
misuse, accident, improper wiring, or negligence of the installer or the consumer.  
 
EXCEPT AS EXPRESSLY SET FORTH ABOVE, NO OTHER WARRANTY, EXPRESS OR IMPLIED, AT 
LAW OR IN EQUITY, IS MADE BY TUSON CORPORATION IN RESPECT OF THE PRODUCT, 
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS 
FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY, AND ANY SUCH WARRANTIES ARE 
EXPRESSLY DISCLAIMED. 
 
IN NO EVENT SHALL TUSON BE LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY LOST 
PROFITS, CONSEQUENTIAL, EXEMPLARY, INDIRECT, PUNITIVE, INCIDENTAL, OR SPECIAL 
DAMAGES OR COSTS (INCLUDING ATTORNEY FEES), OR LOSS OF GOOD WILL RESULTING FROM 
ANY CLAIM (INCLUDING BUT NOT LIMITED TO ANY CAUSE OF ACTION SOUNDING IN CONTRACT, 
TORT, NEGLIGENCE, STRICT LIABILITY OR PRODUCT LIABILITY) REGARDING THIS AGREEMENT, 
EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
 
Some states do not allow the exclusion or limitation of implied warranties, incidental or consequential 
damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific 
rights. You may have other rights, which vary from state to state. 
 

Summary of Contents for RFCAM1000












Reviews: