INSTALLATION / ASSEMBLY
5
Cart Assembly
1.
Attach the two L-shaped sides to the U-
shaped back portion of the cart, making sure
the four holes face up & the key holes are on
the bottom, using the (8) self taping hex
head screws. (See Fig. 1)
Note: A power screwdriver is required to
install the screws-be cautious not to over-
tighten and strip the screws.
2.
Set the base on the top of the cart assembly,
with large opening closer to back portion of
cart, and align the eight mounting holes. Then
set the 2 wheel channels on the base and
attach them using the (8) bolts provided, from
inside the cart upwards through wheel
channels. (See Fig. 2)
Note:
Tighten the bolts securely & Set Cart Upright
Attaching Grill Head to Cart w/o door
Use the following instructions if attaching Grill to
cart
without
a door. (if a door is included, skip to
installation instructions on following page)
1.
With the grill on its back, loosen all 4 bolts
on the bottom side of the grill. (See Fig. 3)
2.
Have someone help you pick up the grill
and set it on the top of the cart, with the
back
of the grill above the cart opening. Make
sure the 4 bolt heads fall through the large
opening of the key hole slots in the top of the
cart. Slide the grill head
forward
so the bolts
are resting in the small opening of the key
hole slots. Tighten the bolts securely-
be sure not to over tighten and strip the bolts.
Next insert 4 hex head screws into grill bot-
tom through cart. (See Fig. 4 or 5)
Note: This is a very heavy step that requires
two individuals to complete.
Fig. 2
Fig. 4
Fig. 5
Fig. 3
Note: Prior to assembly remove protective film from stainless steel parts
Fig. 1
Screw holes
Screw holes
Bolts
Screws
Key Holes
30”
Model
38”
Model
Use
front
set of
key
hole
slots