7
Example:
The connectors of this product have a correct position to be fitted in the vehicle, if these
connectors are installed in an inverted way in the electronic accelerator or in the original
harness, anomalies can be generated in the vehicle. Note that the connectors have a
mechanical design that ensures they do not reverse, however, if they are positioned the
wrong way around by applying excessive force, it is possible to make a reverse connection.
To avoid this, observe below in this press release an example of a connector with the
indications circled in yellow or red, and make sure that during the installation the FAST
harness is connected in the same position as the original harness, where it was connected to
the accelerator at these points.
Make sure that when connecting the FAST, the same positioning is maintained as
shown above.
1) Always keep the female connector lock of the FAST on the same side that the
original female connector lock was connected to the electronic throttle.
2) Straight corners with straight edges (yellow circles) and rounded corners with
rounded edges (red circles).
3) Pay the same attention to connectors that do not have a lock.
Lock
*This attention applies to any connector model, with or without latching, at the
time of installation.
L
Summary of Contents for FAST 3.0
Page 1: ...FAST 3 0 ...
