1. Headset and transmitter should be powered OFF and at least 2 feet away from each other.
2. Connect the transmitter to power (see previous page for instructions)
3. Press and hold the Pairing button on the transmitter for 5 seconds until the LED flashes rapidly. Release.
4. Press and hold Power button (approximately 6 seconds) on the headset until the LED flashes rapidly. Release.
5. Once your Turtle Beach X-Ray headset has been successfully paired, the Headset LED will blink once per second and the
transmitter Power LED will light solid.
Pairing Instructions
6
Using the Transmitter / Pairing Instructions
The transmitter allows wireless flexibility without the restrictions of cables when using your Turtle Beach X-Ray headset. This wireless
communication is through Dual Band WiFi transmitting a signal between the transmitter and your headset from up to 30 ft. If you are
beyond this range or there are obstructions to the signal, you may hear a popping or clicking sound as the signal weakens and is
eventually lost.
For optimal performance, place the transmitter in an open area free from interference from other objects that may otherwise obstruct
the WiFi signal. Avoid placement on a metallic surface such as a home theater A/V receiver as this may cause interference or a weak
signal.
In order for your Turtle Beach X-Ray headset to use the WiFi signal, they need to be “paired” with the transmitter. Follow the pairing
instructions below, keeping the headset and transmitter at least two feet apart while doing so. The headset and transmitter are
pre-paired out of the box. The instructions below are only necessary if pre-pairing appears to have been lost.*
*The pairing process can take up to 30 seconds to complete. If pairing is unsuccessful on first attempt, please try again. It may take as
many as five attempts to pair successfully.
PAIR
SURROUND
ANGLES
SURROUND
ON/ OFF
3
4
