2-4
Mechanical Installation
-Artex
Copyright © 2021 ves.co |
All Rights Reserved
Exhaust Cone
Recommended Tools
Bit (#2)
10mm
Lift/Ladder if applicable
Installation Steps
1. Line up 2 cone pieces (
A
) and secure with screws
at seams using hardware kit (
B
). See
Figure 2-3
.
2. Continue attaching cone pieces (
A
) until cone is
complete.
A
B
Figure 2-3.
Cone Pieces
3. Install screw and nut from hardware kit (
D
) partially
into the top of the assembled cone (
E
). See
Figure
2-4
.
4. Center the guard (
C
) onto the cone (
E
).
5. Install top screw (
D
) fully into the onto the cone
(
E
).
6.
Evenly space remaining screws and flanged wash
-
ers (
D
) around guard (
C
) to secure.
E
C
D
Figure 2-4.
Assembled Cone with Guard
1. Place exhaust cone onto fan. Be sure to orient with
a join pointed upward to reduce snow accumula-
tion as shown in
Figure 2-5
.
2. Secure one screw through exhaust cone into fan.
3. Center the exhaust cone onto the fan.
4. Continue to secure exhaust cone using hardware
kit (
F
). See
Figure 2-5
.
F
Figure 2-5.
Exhaust Cone
