manualshive.com logo in svg

Turnstiles mWing, Operating Instructions Manual

The Turnstiles mWing Operating Instructions Manual is the perfect guide to help you navigate through the features and functions of this sleek and modern turnstile. Download your free manual from manualshive.com to ensure a smooth and hassle-free experience with your new turnstile.

Share
Download
background image

61

mWing

Installation and mounting

7.10.4  Mounting variant 4

With this mounting variant, first mount the base frame on the foundation or 

on the unfinished floor. After completion of the finished floor, mount the 

turnstile directly onto the base frame.
Required material, included in the scope of delivery:

› 

Screw 

5/16" x 1.25" long

, stainless steel

› 

Washer 

3/8" dia

, stainless steel

Required material (not included in the scope of delivery):

› 

Base frame FURA102

› 

Attachment set BSS100 for mounting the base frame, alternatively

customer-supplied fastening material

Before finishing the finished floor - Mounting the base frame

Requirements

› 

The foundation / unfinished floor has been built.

› 

The empty conduits were laid.

› 

The foundation / unfinished floor has hardened.

Foundation and empty conduit plan: 

ä

Page 39, Fig. 11 and 

ä

 Page 43, Fig. 15.

Base frame FURA102: 

ä

 Page 45, Fig. 18.

1. Mount base frame FURA102 on the foundation or unfinished floor.

NOTICE

Incorrect alignment of the pedestrian gate! The pedestrian gate is not

symmetrically constructed. Align the pedestrian gate so that the passage

side is on the correct side. Observe foundation plan.

www.TURNSTILES.us | [email protected] | 303-670-1099

Summary of Contents for mWing





























































































Reviews:

No comments

Related manuals for mWing

Brands by name

Popular brands

Load more brands