Speed Gate Turnstile User Manual
and the greater the vibration. The smaller the value, the slower and more stable the
closing speed. Value 50-150 default value: 35
< D-11 >
Motor strength (master)
Motor strength setting, the larger the value is, the greater gate closing strength and
the greater the vibration. Value : 1-100, default is 40.
< D-12 >
Buffer strength from gate closing (slave)
The buffer strength is adjusted, the larger the value, the faster the closing speed
and the greater the vibration. The smaller the value, the slower and more stable the
closing speed. Value 50-150 default value: 35
< D-13 >
Motor strength (slave)
Motor strength setting, the larger the value is, the greater gate closing strength and
the greater the vibration. Value : 1-100, default is 40.
< D-14 >
Power supply
Adjust the power of the main board power "value 1-10" default value: 6
Do not change it at will.
< D-15 >
Speed to find zero position
After the gate connected to power, the speed to find the zero speed, the bigger the
value is, the faster the speed, the value is 1-10, default is 5, don’t change it at will
< D-17 >
physical pinch sensitivity
The sensitivity setting when the gate hit pedestrian or in the face of obstacle, the
smaller the value is , the higher sensitivity . Note: this setting only be effective when
the
Resistance rebound Mode is set. Value: 1-
99, default is 75.
< D-18 >
Physical clamping current time
www.TURNSTILES.us | [email protected] | 303-670-1099
