3
Pronova-O2 preparation
Preparation of Pronova-O2™ for Patient Placement
This section describes preparations and considerations to prepare the
Pronova-O2™ surface for placement.
1. Plug into properly grounded outlet.
2. Gather InteliDerm™ Face Pack, Chest Wedge, and Abdominal
Sling, place on surface and zero scale.
3. Clear History: Select Begin New Patient from settings menu.
4. Ensure Critical Line Management System is secured and installed on
Head Hoop.
5. Open Head Hoop.
6. Lower and stow Head Side Supports, pull knob to rotate and lower.
7. Remove Pelvic Pads from Pelvic Prone Support.
8. Lower and stow Prone Surface Supports (see images).
1. Unbuckle and rotate surface to attach to prone support arm.
2. Pull knob on left side bottom of prone arm to lower parallel
to surface.
3. Press Prone Support to stow beneath surface.
9. Unbuckle Shin Slings.
10. Lower and stow Side Support Panels (see images).
1. Press button on side of frame to pull outward to edge
of surface.
2. Pull knob under center of panel and lift handle to rotate
outward and down beneath surface.
11. Lower and stow Foot Rests.
12. Lower and stow Inner Leg Support.
13. Lift Accessory Rack.
14. Lock brakes.
15. Ensure Lock Pin is in locked position.
