11
cpr
CPR
Automated CPR
The following section reviews the steps to initiate Automated CPR.
1. Close all open panels if in the Prone Position.
2. Press CPR and resolve any issues shown on status screen.
3. Press and hold CPR to rotate and lower surface to 0° Supine.
4. Monitor all invasive lines for rotation.
5. Engage Lock Pin in Locked position.
6. Place CPR board under patient for proper compressions.
7. Initiate CPR procedures per hospital/facility protocol.
If there is an error with the sensors and all panels are closed to
safely rotate patient into the Supine Position, proceed to Manual
CPR/Manual Rotation procedures or press the Manual CPR
Instructions button on the CPR screen.
