Turnigy T240 Reactor, User Manual

Page: 16 / 21

15
Step 1. Enter to Menu, Select Setting (Image 21), into set interface. (Image 22-24)
LiPo LiFe Lilo LiHV
NiMH NiCD PB Smart
SETTING MONITOR MEMORY CALIBRATION
T240
CH1 CH1 CH2 CH2
1
SETTINGS
PUBLIC
SETTINGS
CH1
SETTINGS
CH2
Buzzer volume
Balance Speed AC Power CH1/CH2
middle
normal
10.0V
Low input voltage
60W/60W
EXIT
SETTINGS
PUBLIC
SETTINGS
CH1
SETTINGS
CH2
INt.Temp Cut-off
Capacity Cut-off Safety Time Cut-off
80 C
10A.0Ah
60 C
Ext.Temp Cut-off
240min
EXIT
SETTINGS
PUBLIC
SETTINGS
CH1
SETTINGS
CH2
INt.Temp Cut-off
Capacity Cut-off Safety Time Cut-off
80 C
10A.0Ah
60 C
Ext.Temp Cut-off
240min
EXIT
PROGRAM OF SETTINGS
Set the volume of the buzzer. Keep Beep default:
Middle, Low/
Middle/High/Off optional
In this menu, you can set the cutoff input voltage of the power supply
of the charger to protect your power supply. The charger will cutoff
working when input voltage lower than the setting value, Range from
11.0-18.0V, Default: 10.0V
In this menu, you can set the cutoff internal temperature to protect
your battery. The charger will cutoff working when the internal
temperature is higher than the setting value range from 30°-85°C,
Default: 80°C
In this menu, you can set the cutoff capacity to protect your battery.
The charger will cutoff working when the capacity is more than the
setting value. Range from off - 65.0Ah, Default: 10.0Ah
In this menu, you can set the cutoff external temperature to protect
your battery. The charger will cutoff working when the external
temperature is higher than the setting value (an External temperature
sensor is needed). Range from 30-85°C, Default: 60°C
In this menu, you can set a safety time to protect your charger and
battery. The charger will cutoff working when the safety time is up to
the setting value. On/Off optional, range from 1-600 minutes,
Default: 240 minutes
Balance control of LiPo/Lilo/LiFe/LiHV, you can set the balance control
to meet your demand. Normal /Fast/ Slow optional. Default: Normal
* Fast: Balance speed fastest, less accurate. * Slow : Balance Speed
lowest, more accurate.
* Normal : Balance speed and accurateness between Fast and Slow
In this menu, you can set the charge power limit to meet your power
supply. The charge will work under the setting value.