Turnigy CriCri-70, Assembly Manual

Page: 5 / 19

Install a servos ectention onto the elevator servo.Either
tie the srco leads together,or use a connector to secure
the extension to prevent it from coming loose during flight.
Istall the front steering landing gear
into fuselage as photo shown.then put the ALU
landing gear into as photo shown fixed by four
3mm screws.
The steering connecting rod two sides was
connected by two regulators,one put in the servo
arm,and another one put in steering arm,between
the regulators there has one 1.5mm steel wire.
THE MOTOR INSTALLED
P5