Turnigy 9XR, User Manual

Page: 22 / 37

Heli Setup (3/11)
This screen is specifically designed to help you set up a CCPM heli.
1. Swash Type: This defines what kind of Swash plate you have on your heli:
i. 120: “Standard” 120° swash plate. The “pitch” servo is towards the front/back.
ii. 120X: Same 120° swash plate but turned 90° so the pitch servo is on one side.
iii. 140: 140° swash plate – again, the “pitch” servo is towards the front/back.
iv. 90: 90° - Basically a simple 90° setup where you have a single servo operating the pitch and
two operating the roll.
2. Collective: This defines the collective's source.
The idea being that you can create a mix with all the required curves and switches
and simply plug it in here to mix with the others.
3. Swash Ring: As the name implies. This limits stick movement just like a physical swash ring.
Notice that this only works on AIL and ELE regardless of radio mode selected.
4. ELE/AIL/COL Invert: These invert the direction of the input functions.
Use these to make the controls move the correct way when setting up your
heli.
HELI SETUP 3/11
Swash Type ---
Collective ----
Swash Ring 0
ELE Direction NOR
AIL Direction NOR
COL Direction NOR