Turner Hastings Close Coupled Toilet, Installation Instructions Manual

Page: 15 / 16

Installation Guide - TOILET FITTING INSTRUCTIONS
Please read this document prior to installation of your product.
Upon receiving your product please open all cartons carefully and inspect for any
manufacturing defects.This installation guide and the fixings provided are intended for fixing into
a solid floor. If you are installing this product into a non solid floor please amend your installation
techniques and fixings accordingly.
Hand Held
Drill
Safety
Goggles
Spirit Level Tape
Measure
Pencil Adjustable
wrench
Silicon Gun PTFE Tape
Tools r equired for installation
1) Carefully measure and plumb in all necessary pipework prior to
installing the toilet. Ensure that you have a clear space within
which to work.
2) Following the correct proceedures for the type of flush kit
included install the inlet and outlet valves as shown fig 1.1.
3) Insert the cistern bolts and locate the cistern correctly onto the
pan as shown in fig 1.2.
Once correctly positioned tighten wing nuts to ensure a secure
connection to the WC pan.
4) Once the cistern is secured to the pan offer the WC up to the
desired position. Ensure that the cistern sits flat against the wall, is
level and the foot of the pan is perpendicular to the wall use a
pencil to mark around the foot of the pan and the fixing holes in
both foot and cistern (fig 1.3).
Fig 1.3
WL
CL
Fig 1.1
For full technical information
relating to the inlet/outlet valves
go to -http://www .geberit.com.au
Bolt
Rubber Washer
Foam Washer
Metal W asher
Nut
Cistern
M6 Nut
Coupling Plate
Backnut
Rubber Sealing Washer
WC Pan
Leather W asher
Metal W asher
Wing Nut
fig 1.2.
Cistern Fixing
Styles