background image

CyanoFluor U

ser’s Manual 

Rev. A 

15 

 

4.4 External Calibrations to Track Algal Abundance 
 

Algal abundance, or other concentration estimates such as µg/L, can be calculated using 
RFU values via external calibration.  All that is required for an external calibration is a 
standard or sample that has a known concentration and your CyanoFluor.  To externally 
calibrate the CyanoFluor using natural water samples: 
 
1)  Take a grab sample from your aquatic habitat 
2)  Measure the sample using the CyanoFluor and record the RFU value for chlorophyll 
3)  Use extraction methods (EPA method 445.0) to determine the actual chlorophyll µg/L 

concentration of the water sample measured 

4)  Create a conversion factor that converts RFU to µg/L  
 
Now all chlorophyll RFU values can be converted to µg/L concentration estimates using the 
conversion factor created from the grab sample analyzed.   
 
This kind of a correlation can also be established to convert PC RFU values to part per 
billion (ppb) estimates using a PC extraction method or PC pigment which may be ordered 
from 

www.prozyme.com

 and diluted in water to specific concentrations. 

Summary of Contents for CyanoFluor




















Reviews: