Pre-Soldered Slipper Assembly Page 1/7
Micro Servo Adapter
installation:
1. If the
Micro Servo Adapter
does not have a split at the
bottom you may want to snip
it at the indicated location.
2. Place the Micro Servo into the
Micro Servo Adapter
noting
the orientation of the servo
shaft, the adapter ears, and
the adapter side that fits into
the chassis mounts.
3. Install the
2 servo mounting
screws,
you do want these
relatively tight)
4. Place the Servo into the
Chassis but
do not install the
screws from the adapter to the
chassis yet.
1.
2.
3.
4.
7
Summary of Contents for SLIPPER
Page 1: ...1 ...