35
34
DE
FR
DE
IT
GB
This accessory is intended for use with the handmixer
CX 500. Follow the operating instructions for the hand-
mixer CX 500. Please retain the operating instructions.
If passing on the appliance to a third party, always
include the operating instructions.
Overview
1. Lid
2. Attachment
3. Blade
(attention: sharp!)
For cutting meat, hard cheese, onions, herbs, garlic,
fruit, vegetables, nuts, almonds (see table, at the end
of this operating manual).
4. Universal cutter jug
with non-slip feet
Operating the appliance
5. Preparation
– Pull out the main plug.
– Place universal cutter jug on a smooth and clean
work surface and depress.
– Insert blade.
– Add food.
Attention
! Before cutting meat, remove gris-
tle, bones and sinews. The universal cutter is
not suitable for cutting
very hard items (coffee
beans, radishes, nutmeg) and frozen food (fruit,
etc.).
– Place the attachment on the universal cutter jug
(1.) and rotate in a clockwise direction until it
"clicks" into position (2.).
6./7. Attachment of handmixer / Commissioning
– Push up the catch on the rear aperture until it
locks into position.
– Place the base unit on the attachment and lock
into position.
– Hold the base unit and universal cutter firmly and
switch on the appliance at setting "
M
". The best
results are achieved by operating the appliance
intermittently
(switch on briefly, pause, switch on
briefly, ... ). Never lift off the work surface.
Important information
– When the rear aperture is open, the appliance can be
operated in fast and continuous operation only "
M
".
Selector switch 1-5 will not function. Open and close
the catch on the rear aperture only when the switch
is in the
O/Off
position.
8.-10. After using the appliance / Cleaning
– After working, remove the base unit from the
attachment by simultaneously pressing both
release buttons (8.).
– Close the catch on the rear aperture (9.).
– Rotate attachment in an anti-clockwise direction
and remove from the universal cutter-jug.
– Take hold of the blade by the plastic handle and
take out.
– To store the processed food, place the cover on
the universal cutter jug (10.).
– Universal cutter and blade are dishwasher-proof.
Attention!
– Never immerse the attachment for the universal
cutter in water and do not clean in the dishwasher.
– Wipe the attachment with a damp cloth only.
Assistance in case of problems
– Switch cannot be moved to settings 1 to 5.
– Remedial action: When the rear aperture is open,
selector switch 1-5 will not function. The catch must
be completely closed.
Safety instructions
–
Risk of injury from sharp blade/rotating drive!
Never grip the blade in the universal cutter. Never
clean cutting blade with bare hands. Use a brush.
Take hold of cutting blade by the plastic handle
only.
–
Important
! Before attaching or removing the uni-
versal cutter, wait until the appliance has come to a
standstill. Only ever use a completely assembled uni-
versal cutter. While working, never lift the universal
cutter off the work surface.
Turmix-CX 500-02-DFIE-V2-2011.indd 35
24.11.11 12:00
Summary of Contents for CX 500
