Turfmech Buffalo 20, Operator'S & Parts Manual

Page: 4 / 40

4
1.0 Introduction
The Buffalo lawn mower range is designed as a professional lawn and sports turf
mower.
The lawn mower is powered by a petrol engine, it is self propelled via a belt and
chain drive to the land roll. The land roll has an internal geared differential. Power is
transferred to the cutting cylinder via toothed belt drive.
The Buffalo mowers are designed for the management of high quality turf. Use in any
way other than that stated is considered contrary to the intended use. Compliance
and strict adherence to the conditions of operation, service and repair as specified in
this manual also constitute essential elements of the intended use.
The way in which the Buffalo mower is operated and maintained will have a profound
effect on its performance and reliability.
A Buffalo mower should be operated, serviced and repaired only by persons who are
familiar with its particular characteristics and who are familiar with the relevant safety
procedures.
The safety precautions outlined in this manual and all other generally recognised
regulations on safety must be observed at all times.
Any modifications carried out to a Buffalo mower will relieve Turfmech Machinery
Limited of liability for any resulting damage or injury.
This manual is based on information available at the time of publication.
Turfmech Machinery Limited reserves the right to amend product specifications
without prior notification.
1.1 Model type and serial number
The model can be found in two places:
1. On the top cover of the mower.
2. On the serial number plate located on the right side of the mower chassis.
The serial number can be found on the serial plate.
Please enter your information below
Model:
Serial Number: