6.
Installation of the completely assembled collection basket onto
the sweeper
A. Lift up the protective cover.
B. Make sure that the ejection chute is clear and free of debris.
C. Place the fully assembled collection basket onto the fastening
points in the rear part of the chassis, as shown.
D. Place the protective cover on top of the collection basket. Check
that the collection basket is seated correctly
Note:
The sweeper may be used without the collection basket with
the protective cover in the lower position. This allows the sweeper to
be used to lift flat blades of artificial grass back into an upright
position. It is recommended to prolong the life of your artificial
grass and keep it looking its best that this is carried out at least
yearly. Use the lowest possible brush height setting without over
stressing the motor. It is recommended that run time does not
exceed 20 minutes of continuous use.
Page No. 10
www.turfmatic.info
