background image

6

85872 RevA

TURFCO T3000 APPLICATOR

Recognizing Safety Warnings Used In Manual

LOOK FOR THE SAFETY HAZARD WARNING SYMBOLS

The symbol is used to alert the operator of safety hazards.

It is used in conjunction with the words DANGER, WARNING, and CAUTION.

“DANGER” identifies immediate hazards which will result in serious injury or death.

“WARNING” identifies potential hazards which could result in serious injury or death.

“CAUTION” identifies hazardous situations which may result in minor injury and/or could result in 

damage or destruction of equipment.

WARNING

CAUTION

DANGER

safe-04

Safety

READ ALL CHEMICAL

WARNING LABELS.

WEAR PERSONAL

PROTECTIVE EQUIPMENT.

PROTECT YOURSELF FROM

CONTACT OR INHALATION

OF CHEMICALS.

WEAR EYE PROTECTION, GLOVES

AND APPROVED

BREATHING MASKS.

safe-77

BE AWARE OF THE HAZARDS OF THE CHEMICALS 

THAT ARE BEING USED AND APPLIED.

ALWAYS WEAR PERSONAL SAFETY EQUIPMENT TO 

PROTECT FROM ALL HAZARDS.

REFER TO THE CHEMICAL MANUFACTURES 

SAFETY WARNINGS FOR THE PRODUCT BEING 

APPLIED, MIXED, TRANSPORTED, OR STORED.

CHEMICALS CAN BE POISONOUS, CAUSE BURNS, 

CAUSE SERIOUS ILLNESS OR DEATH.

PROTECT YOURSELF FROM EXPOSURE AND/OR 

OVEREXPOSURE

READ THE LABELS FROM THE PRODUCT. 

THE TURFCO T3000 

DOES NOT PROTECT

 

THE OPERATOR OR BYSTANDERS 

FROM THE HAZARDS OF EXPOSURE OR 

OVEREXPOSURE TO CHEMICALS.

THE TURFCO T3000 

DOES NOT PROTECT

 

THE OPERATOR OR BYSTANDERS FROM 

THE HAZARDS OF CHEMICALS BEING 

USED DURING APPLICATION OR AFTER 

APPLICATION.

THE TURFCO T3000 

DOES NOT PROTECT

 

THE OPERATOR OR BYSTANDERS FROM 

THE HAZARDS OF CHEMICALS DURING 

MIXING, DURING STORAGE, OPERATION, 

OR DURING TRANSPORTATION OF THE 

MACHINE.

DANGER

DANGER

SAFETY

Summary of Contents for T3000 85872





















Reviews: