turck TN-UHF AUS-CDS Series, Instructions For Use Manual

Page: 188 / 225

Setting
RFID channels – overview of the commands
188
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8.5.20 Command: Query error/status of UHF read/write head
The Read error/status of UHF read/write head command enables error/status messages of the
UHF read/write head to be read.
Request
Loop counter See description of the output data, [ } 156]
Command code 0x0042 (hex.), 66 (dec.)
Read/write head address Not required
Length of EPC Not required
Start address Address in the Get Status response record
Length Length of the data to be read from the Get Status response
record
0: Read entire
Get Status response record
Command timeout See description of the output data, [ } 156]
Write fragment no. 0
Read fragment no. See description of the output data, [ } 156]
Write data Not required