manualshive.com logo in svg

turck RU130-M18 Series, Instructions For Use Manual, Page: 19 / 45

Share
Download
turck RU130-M18 Series Instructions For Use Manual Download Page 19

V2.0 | 2021/06

19

8

Operation

NOTICE

Incorrect use of the sensor

Possible damage to property due to malfunction

„

Prevent the accumulation of material deposits on the surface of the sonic trans-
ducer.

„

Keep the blind zone of the sensor clear. Refer to the technical data for the blind
zone S

min

 of the sensor.

sensor

blind zone

sonic cone

object

S

min

a

coverage

teach-in-range

Fig. 20: Sonic cone and spread of the blind zone (schematic)

8.1

Operation as a diffuse mode sensor – LEDs

In diffuse mode the LEDs have the following indication functions:

LED indication

Meaning

Yellow

NO contact: Object within the teach-in range, switching output 1 on
NC contact: No object in teach range, switching output 1 on

Green

NO contact: Object within the detection range, switching output 1 off
NC contact: Object within the teach-in range, switching output 1 off

Off (only NO contact)

No object within the detection range, switching output 1 off

8.2

Operation as a retroreflective sensor – LEDs

In retroreflective mode the LEDs have the following indication functions:

LED

Meaning

Yellow

Reflector present, switching output 1 on

Green

Object between sensor and reflector, switching output 1 off

Off

No object within the detection range, switching output 1 off

Switching output 2 inverts the signal of switching output 1.

Summary of Contents for RU130-M18 Series














































Reviews:

No comments