Setting
Setting the scan screen
34
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
8.3.1
Area: Sending data – Parameters
Data can be sent if required by HTTP-POST, email or via the Clipboard. The
Sending data
area is
set by default to
Don't send
.
Send via HTTP-POST – Settings
The HTTP-POST method enables large data volumes to be sent to a server for further pro-
cessing.
Fig. 29: Send data by HTTP-POST – Settings
Open the Scan screen.
Open HTTP-POST in the configuration screen.
Set the data transmission via HTTP-POST as per the following table:
Default values are shown in
bold
type.
Parameter
Selection
Description
URL to send to
–
URL on a server to which the read data is to be sent. The URL can contain a
placeholder. Refer to the “HTTP-POST – Placeholders” table.
When to send
Batch
Sends after the scan a POST with the data of all tags located in the POST
data of the handheld, one line per tag. A batch can contain any number of
tags.
Each tag
Sends a POST for each tag found. The EPC is contained in the URL para-
meters.
Extra parameter name
(optional)
–
When set, the user is requested to enter a value for this parameter with
each scan. The parameter can be set for a specific application in the name|
prompt format (see also parameter table in the section “Integrating the
Turck RFID app in the web application”).
Tag data format
CSV
Read data in CSV format, one tag per line. The individual data items are
separated by commas. The following order is used: EPC/UID, TID, USER
data, location
JSON
Read data as JSON array
