V01.00 | 2020/03
25
7.5.3
Example: Write data
A write operation can either be started from the start screen or from the
Scan
screen.
Starting the write operation from the start screen
If no EPC or UID was selected, the device normally writes the first tag found. The nearest tag is
normally found first of all. However, this is not guaranteed. The mode without EPC or UID selec-
tion should be used if only one tag is located in the vicinity of the handheld.
Press
Read/Write
on the start screen.
Fig. 16: Start screen
UHF: Select the memory bank to be written
Fig. 17: Selecting the memory bank