5
[email protected] • www.turck.com • 2015/02
About these instructions
1
About these instructions
These instructions describe the setup, the functions and use of the product and help you to operate the device
for its intended use. Read these instructions carefully prior to using the product, and keep them safe during the
service life of the device. If the product is passed on, pass on these instructions as well.
1.1
Target groups
These instructions are written for suitably qualified and trained personnel and must be read and followed by any-
one entrusted with any of the following tasks:
■
Unpacking and mounting
■
Commissioning
■
Setting
■
Testing and maintenance
■
Troubleshooting
■
Disassembly and disposal
1.2
Explanation of symbols
The following symbols are used in these instructions:
WarnIng
WARNING indicates a possible hazardous situation with the risk of death or serious injury if it is not prevented.
nOTICE
NOTICE indicates a situation that may cause possible damage to property if it is not prevented.
nOTE
NOTE indicates tips, recommendations and important information. The notes contain information, particular op-
erating steps that facilitate work and possibly help to avoid additional work resulting from incorrect procedures.
➤
ManDaTOrY aCTIOn
This symbol denotes actions that the user must carry out.
➥
rESuLT OF aCTIOn
This symbol denotes the relevant results of actions and procedures.
1.3
Associated documents
Besides this document the following material can be found in the TURCK product database:
■
System start with IO-Link (D101931)
■
IO-Link parameters for “High End” ultrasonic sensors (D102012)
1.4
Feedback about these instructions
We make every effort to ensure that these instructions are as informative and as clear as possible. If you have any
suggestions for improving the design or if some information is missing in the document, please send your sug-
gestions to the [email protected].
Ultr
asonic sensors
“H
igh End“