7
[email protected] • www.turck.com • 2015/02
For your safety
2.4
Manufacturer and Service
TURCK supports you in your projects – from the initial analysis right through to the commissioning of your applica-
tion. The TURCK product database offers you several software tools for programming, configuring or commission-
ing, as well as data sheets and CAD files in many export formats. You can access the Product Database directly via
the following address: www.turck.de/produkte
For further inquiries in Germany contact the Sales and Service Team on:
Sales:
+49 208 4952-380
Technical:
+49 208 4952-390
For overseas inquiries contact your national TURCK representative.
Hans Turck GmbH & Co. KG
45466 Mülheim an der Ruhr
Germany
3
For your safety
The product is designed according to the latest state of the art technology. Residual hazards, however, still exist.
Observe the following safety instructions in order to prevent danger to persons and property.
TURCK accepts no liability for damage caused by failure to observe these safety instructions.
3.1
Intended use
The ultrasonic sensors of the „Standard“ series are intended for applications in industrial automation and for the
contactless detection of solid or liquid objects as well as the distance to objects. Any other use is not in accordance
with the intended use; TURCK accepts no liability for any resulting damage.
3.2
Obvious misuse
The devices are not safety components and must not be used for the protection of persons or property.
3.3
General safety notes
■
The product must only be fitted, installed, operated and maintained by trained and qualified personnel. It is
the responsibility of the user to ensure that the product is used in compliance with the applicable regulations,
standards and laws.
■
In order to prevent improper use, the user must read these operating instructions carefully and observe them
without fail.
■
The detection of the object must be checked by the user prior to regular operation. Not all objects are detect-
ed equally well by the sensor.
■
Strong air movements can disturb the correct function of the sensor and corrupt the measured values. Avoid
strong air currents between the ultrasonic sensor and the object to be detected
■
Repairs must only be carried out by TURCK. Return the device to TURCK for this (see section “Repair”).
■
When the device is in operation, ensure that the power supply is within the specified voltage range, otherwise
functionality is not ensured.
■
Interventions in the device are not permissible.
■
Ensure that the plug connections and cables are always in good condition.
■
The sensor must be replaced or repaired immediately if the connector or the sensor is faulty.
Ultr
asonic sensors
“H
igh End“
