manualshive.com logo in svg

turck BL20-2DI-24VDC-P, Hardware And Engineering

The turck BL20-2DI-24VDC-P is a high-quality hardware and engineering product designed for efficient automation processes. This product ensures optimal performance with its 24VDC inputs and features two digital inputs. You can easily access the user manual for this product on our website, where it can be downloaded for free, ensuring a seamless installation and operation experience. Visit manualshive.com to download the manual and unlock the full potential of this remarkable product.

Share
Download
background image

D300717  1211 - BL20 I/O modules

iii

5.9.4

Base modules ....................................................................................................................................................................................... 5-33

5.9.5

Wiring diagrams .................................................................................................................................................................................. 5-34

5.10

Digital input module, BL20 Economy, 16DI, 24 V DC, positive switching (sinking)................................ 5-35

5.10.1

Technical data....................................................................................................................................................................................... 5-36

5.10.2

Diagnostic and status messages.................................................................................................................................................... 5-36

5.10.3

Wiring diagrams................................................................................................................................................................................... 5-37

5.11

Digital input module, 32DI, 24 V DC, positive switching (sinking)........................................................... 5-38

5.11.1

Technical data....................................................................................................................................................................................... 5-39

5.11.2

Diagnostic and status messages.................................................................................................................................................... 5-40

5.11.3

Module parameters ............................................................................................................................................................................ 5-40

5.11.4

Base modules........................................................................................................................................................................................ 5-40

5.11.5

Wiring diagrams................................................................................................................................................................................... 5-41

6

Analog input modules

6.1

General .............................................................................................................................................................6-4

6.1.1

Shielding....................................................................................................................................................................................................6-4

6.1.2

Analog value representation..............................................................................................................................................................6-4

6.1.3

Module overview....................................................................................................................................................................................6-5

6.2

Analog input module, 1AI, 0/4...20 mA   ........................................................................................................6-6

6.2.1

Technical data..........................................................................................................................................................................................6-7

6.2.2

Diagnostic and status messages.......................................................................................................................................................6-7

6.2.3

Module parameters ...............................................................................................................................................................................6-8

6.2.4

Base modules ..........................................................................................................................................................................................6-8

6.2.5

Wiring diagrams   ...................................................................................................................................................................................6-9

6.2.6

Measurement value representation ............................................................................................................................................. 6-10

6.3

Analog input module, 2AI, 0/4...20 mA ...................................................................................................... 6-11

6.3.1

Technical data....................................................................................................................................................................................... 6-12

6.3.2

Diagnostic and status messages.................................................................................................................................................... 6-12

6.3.3

Module parameters (per channel)................................................................................................................................................. 6-13

6.3.4

Base modules ....................................................................................................................................................................................... 6-13

6.3.5

Wiring diagrams  ................................................................................................................................................................................. 6-14

6.3.6

Measurement value representation ............................................................................................................................................. 6-15

6.4

Analog input module, 1AI, -10/0...+10 V DC .............................................................................................. 6-16

6.4.1

Technical data....................................................................................................................................................................................... 6-17

6.4.2

Diagnostic and status messages.................................................................................................................................................... 6-17

6.4.3

Module parameters ............................................................................................................................................................................ 6-18

6.4.4

Base modules ....................................................................................................................................................................................... 6-18

6.4.5

Wiring diagrams   ................................................................................................................................................................................ 6-19

6.4.6

Measurement value representation ............................................................................................................................................. 6-20

6.5

Analog input module, 2AI, -10/0...+10 V DC .............................................................................................. 6-21

6.5.1

Technical data....................................................................................................................................................................................... 6-22

6.5.2

Diagnostic and status messages.................................................................................................................................................... 6-22

6.5.3

Module parameters (per channel)................................................................................................................................................. 6-23

6.5.4

Base modules ....................................................................................................................................................................................... 6-23

6.5.5

Wiring diagrams  ................................................................................................................................................................................. 6-24

6.5.6

Measurement value representation ............................................................................................................................................. 6-25

6.6

Analog input module, 2AI, Pt-/Ni-sensors  ................................................................................................. 6-26

6.6.1

Technical data....................................................................................................................................................................................... 6-27

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for BL20-2DI-24VDC-P



































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for BL20-2DI-24VDC-P

Eaton EMP Quick Start preview
EMP
Brand: Eaton Pages: 2
Multitech MultiVOIP MVP210-SS Configuration Manual preview
MultiVOIP MVP210-SS
Brand: Multitech Pages: 36
Pace V5500 DSL Datasheet preview
V5500 DSL
Brand: Pace Pages: 2
The Things Network TTN Gateway v1 - EU Assembly Instructions Manual preview
TTN Gateway v1 - EU
Brand: The Things Network Pages: 20
Sygonix 1898921 RSL 433 MHz App Instruction Manual preview
1898921 RSL 433 MHz
Brand: Sygonix Pages: 45
Gree ME30-24/D1 Owner'S Manual preview
ME30-24/D1
Brand: Gree Pages: 31
Dynamix 2FXS/2FXO-B User Manual preview
2FXS/2FXO-B
Brand: Dynamix Pages: 122
ELTEX TAU-8.IP User Manual preview
TAU-8.IP
Brand: ELTEX Pages: 102
ELTEX TAU-4M.IP Operation Manual preview
TAU-4M.IP
Brand: ELTEX Pages: 126
Planet WSG-500 User Manual preview
WSG-500
Brand: Planet Pages: 162
Teltonika TVF20 Series Quick Start Manual preview
TVF20 Series
Brand: Teltonika Pages: 4
VoiceInterop AudioMate 360r User Manual preview
AudioMate 360r
Brand: VoiceInterop Pages: 16
Centeron CGW Series Instruction Manual preview
CGW Series
Brand: Centeron Pages: 7
Yeastar Technology NeoGate TA800 User Manual preview
NeoGate TA800
Brand: Yeastar Technology Pages: 59
Xi an ZFE ZF190 Operating Instructions Manual preview
ZF190
Brand: Xi an ZFE Pages: 14
Panduit SmartZone E24 User Manual preview
SmartZone E24
Brand: Panduit Pages: 56
HELVAR DIGIDIM EnOcean 434 Installation Manual preview
DIGIDIM EnOcean 434
Brand: HELVAR Pages: 4
HELVAR 435 User Manual preview
435
Brand: HELVAR Pages: 31

Brands by name

Popular brands

Load more brands