V01.01 | 2022/03
7
3
For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still
exist. Observe the following warnings and safety notices to prevent damage to persons and
property. Turck accepts no liability for damage caused by failure to observe these warning and
safety notices.
3.1
Intended use
The capacitive sensors detect without contact the presence of solid, powder or liquid objects.
The devices may only be used as described in these instructions. Any other use is not in accord-
ance with the intended use. Turck accepts no liability for any resulting damage.
3.2
Obvious misuse
n
The devices are not safety components and must not be used for personal or property
protection.
3.3
General safety instructions
n
The device meets the EMC requirements for industrial areas. When used in residential areas,
take measures to avoid radio interference.
n
The device may only be assembled, installed, operated, parameterized and maintained by
professionally-trained personnel.
n
The device may only be used in accordance with applicable national and international
regulations, standards and laws.
n
Not all objects are detected equally well by the sensor. The detection of the object must be
checked by the user prior to regular operation.
n
The power supply must comply with the regulations for a low voltage power supply with
safe isolation (SELV or PELV).