coffee machine starts to work. The coffee machine pumps water for 15-30 seconds until the coffee
indicator light goes out, then press "Coffee " button to stop pumping water. At this time, you can follow
the normal procedure to make coffee.
3. Pour the whole pure milk into the latte cup in reserve when the steam is preheated.
4. Turn on the steam knob in a counterclockwise direction, when the steam comes out, let it spray in the air to clear the
remaining hot water in the tube firstly, and then turn the knob clockwise to the closed state When there is no water drops
flow out of the tube.
5. Immerse the top of the steam tube to 1/3 position of the milk , and switch the steam
knob to the “MAX”. Gradually
move the top of the steam tube to the place where is just beneath the milk surface, but it could be not higher than the
surface. At this time, there will be a fizzy sound and the milk will be in vortex form in the latte art cup, which means the air
is getting into the milk.
6. When the milk foam is rich enough, put the steam tube deep into the milk and make the milk temperature rise to
about 66
℃
, and then the milk foaming process is completed interrupt steam delivery by rotating the steam knob
clockwise and at the same time pressing the steam button.
7.
Firstly, pour the espresso coffee into the coffee cup, and then the foamed milk into the coffee cup. By now the
cappuccino coffee is done. You can also add the right amount of sugar or cocoa powder on top according to your taste.
Warning: the steam nozzle shall not be placed on the surface of the milk so as not to
be scalded as it will cause milk splash
Tips: If there are distinct bubbles in the mike foam, knock the latte cup to eliminate
some large bubbles, and then shake the latte cup horizontally to mix the milk and milk
foam fully.
Note: to prepare more than one cappuccino, first make all the coffees then at the end prepare
the frothed milk for all the cappuccinos.
Notes:
1. After making the milk foam, the steam tube should be cleaned with a piece of wet cloth in time to avoid the remaining milk
attaching to the steam tube.
2. After finishing the milk foam, turn on the steam knob to make the coffee machine release steam for a few seconds, then switch
off the steam knob , clean the steam outlet in case the steam outlet is blocked by the remaining milk.
Cleaning
1.
Before any cleaning or maintenance operations, turn the machine off, unplug it from the power socket and allow it to
cool down.
2. Do not use solvents or detergents when cleaning the coffee maker. Use a soft wet cloth.
3.
Remove the drip-tray, empty and wash it regularly.
