B. dual filter
1. Press the knob on the dust cup arm.
2. Lift dust barrel up.
3. Take apart the dual cyclone system.
4. Use a soft brush to clean the dual filter then rinse it with clean water, dry it before
replace it.
Note: please take the pre-motor filter out before rinse the dual filter.
C. Air outlet filter
1. Take out the air outlet filter for cleaning and changing.
Please note:
The Hepa filter in the cleaner will became dusty over time. This is normal and will not
affect the performance of the filter. If the Hepa filter is so dusty that suction does not
return to 100%, we suggest that the filter be removed
then rinsed under the faucet and allowed to dry for 24 hours by airing not near the fire or
some high temperature objects before refitting into the vacuum. This should be done
once six months or when suction appears to be reduced obviously.
Important:
Please note that there is a safety switch inside the vacuum to prevent the unit from
being run with high vacuum rate. If the vacuum is too high, the safety switch will be
turned on. In this case, it can minimize the vacuum rate and protect the motor from
being broken.
