![background image](http://html1.mh-extra.com/html/turbotronic/tt-x12/tt-x12_instruction-manual_1181512007.webp)
TurboTronic
®
Warranty coverage applies to the original owner and to the original
product only and is not transferable.
TurboTronic
®
warrants that the unit shall be free from defects in material and
workmanship. Limited Warranty apply only when it is used under normal household
conditions and maintained according to the requirements outlined in the Owner’s
Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in
TurboTronic
®
sole discretion, will be repaired or replaced
2.
TurboTronic
®
reserves the right to replace the unit with one of equal or greater
value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups,
blades, blender bases, removable pots, racks, pans, etc.), which require regular
maintenance and/or replacement to ensure the proper functioning of your unit, are
not covered by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform
required maintenance (e.g., failure to keep the well of the motor base clear of food
spills and other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by
TurboTronic
®
. These
defects include damages caused in the process of shipping, altering, or repairing
the
TurboTronic
®
product (or any of its parts) when the repair is performed by a
repair person not authorized by
TurboTronic
®
.
6. Products purchased, used, or operated outside Europe.
Illustrations may differ from actual product.
We are constantly striving to improve our products, therefore the specifications
contained herein are subject to change without notice.
TurboTronic
®
and
Z-Line
®
are registered trademarks of
Z-GLOBAL B.V.B.A
®
.
PRINTED IN PRC