![background image](http://html1.mh-extra.com/html/turbotronic/tt-x12/tt-x12_instruction-manual_1181512005.webp)
USE AND FUCTION
Do not connect the adaptor when using the appliance
You should regularly check that the nozzle is clean as any foreign object
may scratching sensitive floors.
1, Inset the crevice nozzle (6) into main unit when cleaning table, car, corner
sofa, carpet etc.…
2, Insert the rubber nozzle into main unit when cleaning water.
3, Start the device by pushing the on/off button (4) upward.
4, Pushing the on/off switch button (4) downward to turn off the device.
EMPTYING/CLEANING
Careful cleaning of the dust container and filters
1. Remove the whole dust bin by pressing the release button and take the dust
container off. (pic1)
2.
Pulling out the filters and emptying the contents of the dust container into a
suitable vessel or bag. (The filter can be shaken clean or cleaned and rinsed
using warm water. Make sure that the parts are dry before they are re-installed.)
(pic2)
3.
Empty the dust tank. (pic3)
4.
Washing the filters under water. (pic4)
5.
Re-install the components
Important: Make sure that the parts are dry before they are re-installed.
Put the filter into dust container. Assemble the dust bin to the motor unit