background image

user manual 

QLight™ DP series 

QLight DP series manual 

page 33 

Incidental and consequential damages 

Turbosound's liability is limited to the repair or replacement, at our option, of any defective 
product, and shall not be liable for any incidental and consequential damages including, without 
limitation, injury to persons or property or loss of use. 

Limitation of implied warranties 

All implied warranties, including warranties of merchantability and fitness for a particular purpose, 
are limited in duration to the length of this warranty. 

This warranty is in addition to, and in no way detracts from, your statutory rights as a consumer. 
No other warranty is expressed or implied. 

Please record your purchase information below for future reference: 

Dealer Name  .................................................................................................................................. 

Dealer Address ............................................................................................................................... 

......................................................................................................................................................... 

......................................................................................................................................................... 

Post / Zip Code ............................................................................................................................... 

Dealer telephone / fax ................................................................................................................... 

Invoice number .............................................................................................................................. 

Date of purchase ............................................................................................................................ 

Unit serial number ......................................................................................................................... 

Summary of Contents for QLight TQ-115DP




































Reviews: