user manual
QLight™ DP series
QLight DP series manual
page 12
TQ-315DP and TQ-445DP connector panel functions
1.
AUX connection – RS232 port used for updating settings or firmware.
2.
Signal link – lockable 3-pin XLR line input socket connects to audio mixer. Fully balanced,
pin 2 Hot, pin 3 Cold and pin 1 not connected.
3.
Signal link – lockable 3-pin XLR line output socket connects to additional cabinets. Fully
balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected.
4.
Mode switch – used to change the low frequency tuning when used with QLight™ series
subwoofers or for stand-alone operation.
5.
Power – blue LED indicates when AC power is applied to the amplifier module.
6.
Limit (low) – red LED used to indicate LF limiting, self test and protection.
7.
Limit (high) – red LED used to indicate MF/HF limiting, self test and protection.
8.
Fuse – AC line fuse. Replace only with 10A 230V anti-surge fuse.
9.
Power – Blue LED indicates when AC power is applied to the unit.
10.
AC Mains connection – accepts Neutrik PowerCon® 3-pin cable-end connector.
1
2
3
4
9
10
8
5
6
7
Summary of Contents for QLight TQ-115DP
Page 2: ...user manual QLight DP series QLight DP series manual page 2...
Page 34: ......
