user manual
MILAN
MILAN user manual
Page 20
Installing the Milan loudspeaker
Using the M10 rigging points
The Milan loudspeaker can be permanently installed in a venue,
suspended from eyebolts fitted to the internal M10 rigging points
on the top and bottom of the cabinet. Three possible orientations
are available: vertically upright, or upside down to position the high
frequency driver closer to the audience, or sideways if required.
Insert M10 load-rated shoulder eyebolts
into the threaded rigging points and
tighten. The front rigging points should
take the majority of the load while the rear
rigging point should be used for angling
the cabinet downwards only.
When installing the
cabinet sideways,
pick up from either of
the two front eyebolt
pairs, and bridle the two rear eyebolt points to
provide a single pull-back for adjusting the
downward angle.
Wall Mounting
The Milan loudspeaker can be conveniently wall mounted using the PB-55 pole mount wall
bracket, which simply locates into the pole mount socket in the bottom of the cabinet.
Mount the bracket to the wall using suitable fixings, and locate the loudspeaker onto the pole
mount bracket. Rotate and angle the loudspeaker to optimise coverage and tighten the locking
mechanism to stop the loudspeaker from being inadvertently removed.
