TurboLock TL - 200 11
Step 2.
Align the plate on the back of the door while making sure to thread the cables under the lowest peg. Move the
cables to the corner opening of the plate. Thread the latch pin through the larger hole and match up the pegs with
the smaller surrounding holes. Use the 3x mounting screws to fasten the plate to the back of the door. Make sure all
screws are tightened.
(Fig. 5)
Check and adjust the plate or cables as needed to make sure the cables are tucked under the lowest peg. Do NOT
force the screw through the cables as this will damage the lock and/or make it unusable.
2
3/4
” 2
3/8
”
2
3/4
” 2
3/8
”
2
3/4
”
70
60
2
3/8
”
2
3/4
” 2
3/8
”
(Fig. 5)
Summary of Contents for tl-200
Page 2: ...www turbolock com Customer Service 855 850 8031 TM ...
Page 31: ......
