Operation
6
Operation Guide
This oven is intended for use in a commercial kitchen and must only be put to the use for which it was intended, i.e. cooking food
product.
To use this oven correctly please read the following sections carefully:-
Some parts of this oven will become VERY
HOT during use and could cause burns if
touched.
Warning
Take care when opening the oven door
during baking. Let the hot air and steam
escape before removing or replacing food as
the steam produced can cause steam burns.
Warning
Temperature Display -
Shows pre-set chamber temperature.
When used with the ‘Temp’ key, display shows
actual oven temperature for 5 seconds.
Shows cooking programs and error codes.
‘Steam’ Key and LED -
Used to set moisture level or to
provide a manual injection of moisture
when in Manual Moisture Mode.
LED is ‘On’ when automatic moisture injection is
set or when moisture is manually injected.
Temperature Adjustment Control
Time Display -
Shows cook time in full minutes only
from 180 - 10, and in minutes and seconds for
the final 10 minutes.
NOTE:
In Core Temp Mode, time display
alternates between ‘CP’ and set core probe
temperature.
‘On-Off/Light’ Key and LED -
A dual-function key:
Press ‘On-Off/Light’ key once to turn
the oven ‘On’
When oven is turned ‘On’, press ‘On-Off/Light’
key to switch oven light ‘On-Off’.
Press and hold ‘On-Off/Light’ key for 1.5 seconds
to turn the oven ‘Off’.
Time Adjustment Control
NOTE:
In Core Temp Mode, ‘Timer’ knob is
used to set core probe temperature.
‘
Program’ Key and LED -
Used to select cooking programs, and
to set program parameters.
‘
Temp’ Key and LED -
Displays actual oven temperature for 5
seconds on Temperature Display. LED
‘On’ when heating element is on
(heating indicator).
LED flashes when Upper Display is showing
actual temperature.
NOTE:
In Core Temp Mode, this key is used to
display Actual Oven Temperature (Upper
Display) and actual Core Probe Temperature
(Lower Display).
‘Fan Lo’ Speed Key and LED -
Switches oven fan from high to low
speed. LED is ‘On’ when fan is in Low
Speed Mode. When LED is ‘Off’, fan is
in High Speed Mode.
‘
Timer-Start/Stop’ Key & LED -
The ‘Timer-Start/Stop’ key is used to
control the following functions:-
Cancelling Alarm (All Modes).
Starting Core Temp Mode (Core Temp
Mode).
Starting Timer (Manual Mode).
Pausing (Manual / Program Modes).
Re-Setting Timer (Manual Mode).
Starting Program (Program Mode).
Cancelling and Re-Setting Program
(Program Mode).
Core Probe Connection Point.
