TurboChef FRE-1002D, Service Manual

Page: 22 / 40

8 OVEN OPERATION
Setting the Temperatures
Two different temperatures can be set: one for the upper heating zone and one for the lower heating zone.
These temperatures range from off to 842°F (450°C).
NOTE: When a temperature is set to off, the display will read 32°F (0°C).
To set the temperature:
1. While the oven is on, press the Temperature key to access the upper temperature (the upper
temperature will begin flashing).
2. Use the Up and Down keys to set the upper temperature.
3. Press the Temperature key again to save the upper temperature and to access the lower temperature.
4. Use the Up and Down keys to set the lower temperature.
5. Press the Temperature key again to save the lower temperature.
NOTE: If changing only one temperature, simply press the Temperature key to bypass the upper or lower
temperature without changing it.
Setting the Timers
Six different timers can be set to accommodate different items.
To set a timer:
1. Make sure no timers are running.
2. While the oven is on, press and hold the desired timer button (1 through 6) for two seconds. The value
indicated on the Time display will begin flashing.
3. Use the Up and Down keys to set the time.
4. Press and hold the same timer button for two seconds to save the time.
NOTE: If you wait five seconds without pressing any buttons, the timer will save automatically.
To pause a timer:
-
Press any of the Time Preset keys. The time on the Time Display will flash to indicate the timer
is paused.
- To resume the timer, press any of the Time Preset keys again.
- To reset the timer to 0, press and hold any of the Time Preset keys for two seconds. The oven will
begin beeping to indicate the timer has reached zero. To stop the beeping, press any of the Time
Preset keys.
Setting the Parameters
Access the parameter settings to change oven options. For a full list of parameters, descriptions, and
values, see page 9.
To set the parameters:
1. While the oven is off, simultaneously press and hold the Time Preset 2 and 3 keys for two seconds. The
Upper Temperature display will read “PA”.
2. Press the Down key until the Time display reads “-19” (negative nineteen).
3. Simultaneously press and hold the Time Preset 2 and 3 keys for two seconds. The Upper Temperature
display will now read “P0”.
4. Refer to the table on page 9 and use the Time Preset 2 and 3 keys (increase and decrease parameter
numbers) to navigate through the parameters.
5. Use the Up and Down keys to change the values.
6. When finished, press the On/Off key.