16
o
Make sure you are in mode 1,2 or 3, use the joystick to rotate the pan axis and handle bar 90 degrees counter
clockwise. The handle bar should now be lined up with the camera and the joystick should be at the front, near the
camera lens.
o
Grab the rubber grip handle in the front with one hand and allow the back handle to hang down to the ground.
The handle bar should now be vertical.
o
Check that the camera is level with the ground. Make any adjustments to the gimbal that you need to ensure that
the camera is level with the ground.
o
Power up the gimbal. The gimbal will recognize that it is in briefcase mode.
o
Don’t forget to change to the correct mode for your camera size by using the joystick button.
Accessory Mounted Position
Whenever you remove the top handle bar to mount the gimbal, you are in the Accessory Mounted Position. This includes
the Under-Slung, Inverted, or Briefcase orientations while mounting the gimbal without the use of the handlebar and
joystick.
o
Remove the top handlebar and joystick with the gimbal powered off and mount the gimbal to your accessory
using the mounting plate.
o
Power on the gimbal. The gimbal will be in the small camera mode by default. If the gimbal is not behaving
correctly, please visit
www.turboace.com
for detailed instructions on how to use the gimbal in the Accessory
Mounted Position with larger cameras.
