TBS-223 Wireless Vehicle detector
REV 1.0
23
7
Can we install TBS-223 in the
ground
TBS-223 is designed for surface mount device.
We recommend customer to use the same
feature TBS-201 devices for in ground
applications.
8
We have received some IN and
OUT message in very short
time like 1-10sec.Why it
happens, is it normal?
TBS-223 is a very sensitive sensor. Especially
under Parallel installation.
If there is a vehicle drive on top of the sensor and
stay like 0.5 sec or pass-through speed in less
than 10km etc, the sensor may be activated and
checked the status 2 times for IN and OUT
In this case, it will report IN when the vehicle
drives IN and then report OUT when the vehicle
left the sensor, it could take only 1-2 second to
report between 2 sessions where depends on
network status
9
The Vehicle is Not parked on
top of the sensor but it still
shows the parking spot is
occupied
Please double check if there is any vehicle or
metal object in the Active zone mentioned in the
10
Parking Sensor is not working
while there is a vehicle on top
of it.
Please double check if there is any object on top
of the sensor, it will be best to have no other
object or sticker on the top surface of the sensor
11
Can I put a sticker on the
sensor?
Yes, please put the required sticker to the side of
the sensor which already have the engraved
marking for customer putting reflective sticker
12
Can I put sticker on the top
surface of the sensor?
It is not recommended to put any sticker on top of
the surface; however, if customer want to put the
sticker on the top surfaces, we will highly
recommend the sticker only put-on top of the
surfaces closed to the Arrow marking only
13
Sensor can't connect to
WeChat App or Android App
Please check whether the GPS is turn on and
allow the APP to access the GPS location
