6
Cleaning and Maintenance
Cleaning
1.
Press the “lock screen” key, the smoke guide board descends to the
lowest position, use your hands to grab the front of the smoke guide plate,
turn down, make the smoke guide board out of the hook, and turn a certain
angle, take the smoke guide plate.
2. Drag the filter with your left hand, then use the cross screwdriver to unscrew
the two screws on the filter and lift it upwards.
3. Hold the two ends of the oil cup with your hands, keep the level, slowly move
to the front of the cooker hood, remove the oil cup and pour out the waste
oil.
Protective cover:
The protective cover is extruded from both sides to the middle, lifted up, and the
protective cover is removed.
The cover plate of the chassis:
First disconnect the power supply, remove the protective cover assembly, oil
cup, smoke guide board component, and then use the cross screwdriver to
remove the screw of the push rod motor and the sliding support. After the two
components are separated, the sliding support is slipped to the bottom.
Fan:
1. After unloading the case cover, screw the air inlet plate with a screwdriver
and remove the intake ring.
2. Unscrew the hood clockwise and remove the wind.
