U s e r I n s t r u c t i o n s
Eco-Net 128 Control Unit
InMn 26 UCESTD
it Rev.1.02
TURBO s.r.l.
Dust Filter Components
Via Po 33/35 20811 Cesano Maderno (MB) Italy Tel ++39 0362 574024 Fax ++39 0362 574092
11
Display and keyboard
There are 5 round keys on the front panel, used to access the
equipment functions.
When turned on, the display shows the name of the control unit
and the firmware/hardware version on the first page.
The next page shows the current operating conditions. The first
line shows the ΔP value measured by the internal transducer.
The second displays the current operating mode which, in the
case of an anomaly, alternates with the contextual signal.
The third line displays the progression of the cycle in progress
and the decrease of the pause time.
The last line indicates the function associated to each button.
By pressing the
buttons, the brightness of the display on the main screen can be adjusted. In
the other screens, these are used to modify a value set or to consult the alarms.
By pressing the "L" button, access is given to the display language selection screen; select from the five
available: Italian, English, French, German and Spanish.
By pressing the "S" button, the cycle in progress stops. It can be resumed by pressing the button again.
It is active only in "manual" and manual-special" operating mode.
By pressing the “MENU” button, access is given to the selection screen, from where it is possible to use
the “
” and “
” buttons to scroll the items available.
Once the item desired is highlighted, press "OK" to access the corresponding parameters.
In the event of an alarm, the "MENU" button can be used to RESET (rearm) the event.