■
In good ventilation.
• Place the refrigerator in
good ventilation for a good
operation.
■
Install the refrigerator at
indoor not to get wet from
the rain.
• This unit is designed for
indoor usage only.
■
Install the refrigerator on
the places with 41~95°F.
• The stored materials could
be frozen or broken below
41°F and cooling efficiency
could be lower over 95°F.
■
Place the refrigerator on
hard and level floor.
• Unlevel floor may cause the
refrigerator to make noise.
■
Avoid places that are
exposed to smoke.
• The discoloring can occur to
the refrigerator.
■
Set the front of the
refrigerator a little bit
higher than back-side by
using adjustable feet to
drain the water away
easily.
■
Put away heat source from
the refrigerator.
• High ambient temperature
will make cooling efficiency
lower.
■
Place the refrigerator in an
area with low moisture.
• Splashing water or a high
moisture area may cause
short circuit and make
rusting easier.
■
Ajust the temperature in
the refrigerator.
• Controller is attached to the
right on the upper.
• Set the temperature control
at normal position.
2
Install
at the degree
of 41~95
°
F
Set the front
side higher than
back side.
HOW TO INSTALL
COOL
OFF
NORMAL
COLD
