2
TYPICAL CONNECTIONS
CABINET SUPPORT
Attach to extrusion using 1/4-20 Drop-In T-Nut
and 1/4-20 x 1/2" Button Socket Cap Screw
DETAIL A
Typical T-Nut Fastener Installation Instructions
These General Instructions Shall
Apply to All Bracket and Plate
Connections that Require T-Nut
Fasteners as Part of the Connection.
- Insert 1/4-20 x 1/2" BSCS Thru Hole
in Plate / Bracket & Thread T-Nut
2-Turns Onto Bolt. Repeat for Rest
of Connection Holes.
- Next, Align T-Nuts so they Match the
Extrusion Being Connected &
Depress Into Channel.
- Should Look Like This Before
Further Tightening Takes Place.
ATTENTION :
- As Initial Tightening of Each BSCS
Begins, T-Nuts Must Pivot in Channel
Engaging the Shoulders of T-Nut
Against the Walls of the Channel.
- Pay Special Attention that Each T-Nut
"Engages" Before Continuing to
Tighten Each Bolt.
CORRECT
INCORRECT
Shoulders Did Not Engage
Into Sides of Channel.
Z-CLIP MOUNTING BRACKET
Attach Z-Clip Mounting Bracket using 1/4-20 Drop-In
T-Nut and 1/4-20 x 1/2" Button Socket Cap Screw
DETAIL B
Slide T-Nut into
opening of post
and into place.
Engage T-Nut
and Tighten.