Tunturi Vibration plate V20, User Manual

Page: 9 / 40

9
English
Sudden stop of the unit
- Default or pre-set working time is up, restart the
unit after 10 minutes interval.
Unit does not respond to commands
- Too many commands send to the unit is short
time and cannot be processed simultaneously,
restart the unit, unplug power cord for at least 5
seconds and start the unit to resolve.
Display show ER01 or ER02
Motor power problem and units stops to protect
from damage. Restart the unit, unplug power cord
for at least 5 seconds and start the unit to resolve.
Warranty
Warranty terms
The consumer is entitled to the applicable legal
rights stated in the national legislation concerning
the commerce of consumer goods. This warranty
does not restrict these rights. The Purchaser’s
Warranty is only valid if the item is used in an
environment approved by Tunturi New Fitness BV
for that particular equipment. The product-specific
approved environment is stated in the Owner’s
Manual provided with your equipment.
Declaration of the
manufacturer
Tunturi New Fitness BV declares that the product
is in conformity with the following standards and
directives: EN 957 (HC), 89/336/EEC. The product
therefore carries the CE label.
04-2020
Tunturi New Fitness BV
Purmerweg 1
1311 XE Almere
The Netherlands
Disclaimer
© 2020 Tunturi New Fitness BV
All rights reserved.
The product and the manual are subject to
change. Specifications can be changed without
further notice.