Tunturi FitRun 70i, User Manual

Page: 24 / 72

2 4
English
NOTE
• Some circuit breakers used in homes are not
rated for high inrush currents that can occur
when a treadmill is first turned on or even during
normal use. If your treadmill is tripping the circuit
breaker (even though it is the proper current
rating and the treadmill is the only appliance
on the circuit) but the circuit breaker on the
treadmill itself does not trip, you will need to
replace the breaker with a high inrush type. This
is not a warranty defect. This is a condition we as
a manufacture have no ability to control.
Unfolding and folding the
equipment (fig. F1-F2)
The equipment can be unfolded for use (fig. F1) and
folded for transport and storage (fig. F2).
Refer to the illustrations for the correct way of unfolding
and folding the equipment.
CAUTION
• Before folding the equipment, make sure that
the incline is 0%. If the incline is not 0%, folding
will damage the mechanism.
Console (fig. E-1)
CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is covered
with drops of sweat.
• Do not lean on the console.
NOTE
• The console switches to standby mode when the
equipment is not used for 10 minutes.
Press any key to wake up console again when
being in standby mode.
Buttons
Start
- Start selected workout
Stop
- Pause the training (in workout mode).
- Stop the active training. ( in pause mode )
- Clear value in programming mode.
- Reset console when press and hold for 2 seconds in
“stop mode”
Incline up
- Increases the incline (0~15 ±1).
- Scroll programs and change values in programming
mode.
Incline Down
- Decreases the incline (0~15 ±1).
- Scroll programs and change values in programming
mode.
Incline hot keys.
Incline Hot Keys are set as: 6, 8 & 10.
For example, the incline level changes from any level
to 8 by pressing the Incline Hot Key 8.
Speed Up
- Increases the speed (0,8~20 km/h ±0,1km/h).
- Pressing and holding will increase the speed faster.
- Scroll programs and change values in programming
mode.
Speed Down
- Decreases the speed (0,8~20 km/h ±0,1km/h).
- Pressing and holding will decrease the speed faster.
- Scroll programs and change values in programming
mode
Speed hot keys:
Speed Hot Keys are set as: 6, 8 & 10 km/h.
For example, the speed changes from any speed to 8
KPH by pressing the Speed Hot Key 8.
Mode
- Select program mode.
- Confirm setting to enter next step in programming
mode.
- During workout mode, change parameter for
Speed/ Pulse & Calories/ Incline window.
Manual
- Select the program mode “Manual”(P-1) quickly.
Weight loss
- Select the program mode “Weight loss ”(P-2)
quickly.
Interval
- Select the program mode “Interval ”(P-3) quickly.
Hill Climb
- Select the program mode “Hill Climb ”(P-4) quickly.
Walk
- Select the program mode “Walk” (P-5) quickly.