STEP 5
Apply your blood to the tip of the test strip in the blood
sample area. Once enough blood has been applied the
myMobile screen will display the words: ‘Blood detected.
Please wait for the results.’
STEP 6
The device will analyse the sample and the result will show
in myMobile. Tap ‘
Continue
‘ on myMobile.
STEP 7
Remove the protective end of the lancing device and press
the slider to eject the lancet into a sharps bin. Hold down
the eject button on the glucometer to remove the test strip
and then dispose of it in your normal household rubbish.
STEP 8
If your readings are outside of your normal limits you may be
prompted to take the reading one more time from STEP 3.
Our policy of continual development means that product specifications and appearance may change without notice. Tunstall does not accept any responsibility for
any errors and omissions contained within this document. © 2020 Tunstall Group Ltd. Tunstall is a registered trademark. Tunstall Australasia Pty Ltd is a member of the
Tunstall Group.
8271-UG-10
Tunstall Australasia Pty Ltd is a member of the Tunstall Group.
Tunstall Australasia t/a Tunstall Healthcare
ABN 44 056 121 863
t:
1800 603 377
e:
w:
tunstallhealthcare.com.au
Tunstall New Zealand
Business No. 3502431
t:
0800 488 678
e:
w:
tunstall.co.nz
Cleaning Instructions
•
Clean the monitor at least weekly or when soiled.
•
To clean the exterior surface of the device, use a soft cloth, slightly dampened (not wet) with
a small amount of liquid soap diluted in water. Ensure the meter is powered off and then
wipe it clean. Do not let liquid accumulate or enter any opening.
•
To disinfect the surface of the meter, the use of Cavi Wipes is recommended. Take one wipe
to clean the meter, including its front and back for 10 seconds for cleaning until there is no
soil on the surface. Then disinfect the meter with another wipe and keep the surface wet for
2 min.
