Tunstall Home box, Quick Setup Manual

Page: 4 / 8

Step 2 - Activating the unit
Once the leads and adaptors have been connected, please call
0330 123 3303 from your telephone to enable the home unit to be
programmed. The operator will then call you back. When your
telephone and home unit ring, please answer the call by pressing
the red alarm button on the unit or on the pendant. This will answer
the call in hands free mode and the operator will be able to speak to
you via the home unit to advise you that the unit is about to be
programmed. You will begin to hear send and receive tones. You do
not need to do anything other than keep the noise level to a
minimum. Once the unit has been programmed the operator will
speak to you to confirm this.
Step 3 - Testing
Press the red alarm button on the home unit and ensure it
generates a call through to the monitoring centre. The monitoring
centre operator will welcome you to the service and check they
have your correct contact details.
You will also need to test the pendant by pressing its red button
and ensuring a call is generated and received at the monitoring
centre. We advise that the pendant is tested from several points in
your home and garden so that you are able to establish the range of
the system in your home.
Step 4 - Ready to use
Once successfully tested, the Tunstall Home system is ready to use.