A l l t h e r e a s s u r a n c e y o u n e e d
D6607016 Issue A
Page 7 of 11
help you remember when the battery
should be changed.
•
Remove battery and replace it with the
new battery, remember to observe the
correct orientation. When the battery is
first placed in the unit an automatic test
call will be generated (no lights will show
and no buzzer will sound).
•
Replace the sliding cover and the screw.
Test the fall detector by making a manual
call. Inform the operator that you are
making a battery test call.
•
If the device fails to make a test call then
check the orientation of the battery. If this
is correct then contact your supplier.
Do not dispose of the old battery in the bin, please
return it to Tunstall (c/o Service Centre) at the
address shown overleaf.
Li
1.
First remove
the screw.
2.
Then slide the
cover off in the
direction of the
arrow.
+
3.
Orientation
(copper end).
