A l l t h e r e a s s u r a n c e y o u n e e d
D6607016 Issue A
Page 3 of 11
Automatic fall detection
•
Green light and two "beeps" indicates that
the
fall detector
has been activated.
•
The
fall detector
will then monitor for
between 6 and 15 seconds to verify if
there could have been a fall. The green
light will flash while it does this.
•
If the detector has decided that there is
a fall, then a red light and four "beeps"
indicates that the
fall detector
is about
to trigger an alarm call (because it has
detected an impact and has not been
upright for between 6 and 15 seconds).
•
If the detector has decided that it was
activated by error then the green
flashing light will stop after between 6 to
15 Seconds and the unit will revert to
normal again.
•
The
fall detector
also features a manual
button, which can be used at any time to
raise a call for help if required.
