manualshive.com logo in svg

Tunstall ComStation BUS-C, User Manual

Share
Download
Tunstall ComStation BUS-C User Manual Download Page 51

00 8811 17, 08/18 (Rev. 6.0)

49

10. Activating a shift

You only need to read this section, if shifts are assigned to your ward. Ask 
your system administrator.

To support zone nursing Tunstall has developed the concept of zones and 
shifts:

Zone

A zone is a part of a ward within which calls are forwarded. Calls which are 
triggered within the zone are not forwarded to rooms in the ward which lie 
outside the zone. Usually, certain nursing staff are responsible for one zone.

Shift

The zones of a ward are not set for the long-term. The zone organisation can 
change. Each division of the ward into zones is classed as a “shift“.

A shift refers to the division of a ward into a maximum of 8 zones. Thus, the 
zones may overlap each other, i.e. certain rooms can belong to several 
zones.

A maximum of 8 different shifts can be defined for each ward. You activate 
shifts using the ComStation

BUS-C

.

ComStation

BUS-C

One or more ComStation

BUS-C

 units are installed in each ward. According to 

the shift, the ComStation

BUS-C

 units can belong to different zones. If a ward 

is divided into zones, but only has one ComStation

BUS-C 

unit, the system is 

usually programmed that the ComStation

BUS-C

 belongs to all zones.

Examples

On the following pages you will find two examples of shift division.

Summary of Contents for ComStation BUS-C









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands